Fixing Windows Installation Problems With Network Configuration Tools

Apr 8, 2025 | WINDOWS10

Here’s a step-by-step guide to fixing common network configuration issues in Windows:

Step 1: Check Your Network Settings

  • Click on Start > System > Network & Internet.

  • Make sure that your Wi-Fi is enabled and connected.

  • If you have multiple networks, select the correct one as your primary network.

  • Ensure that your router’s SSID (network name) is not set to default.

Step 2: Restart Your Router

  • Unplug the power cord from the back of your router.

  • Wait for 30 seconds.

  • Plug the power cord back in and wait until the lights on the router turn on.

  • This will restart the router and allow you to reconnect to your network.

Step 3: Update Router Firmware

  • Go to your router’s manufacturer website and check if there are any firmware updates available.

  • Follow the instructions to update the firmware.

Step 4: Change Your Wi-Fi Password

  • Click on Settings > Network & Internet > Wi-Fi.

  • Select your network from the list of connected networks.

  • Tap or click on the three dots next to your network name.

  • Scroll down and select Change.

  • Enter a new password for your network.

Step 5: Reset Your Router (If Necessary)

  • If you’ve tried all previous steps and still have issues:

  • Unplug the power cord from the back of your router.

  • Wait for 30 seconds.

  • Plug the power cord back in.

  • Hold down the Reset button on your router for about 10-15 seconds.

  • Release the button when the LED lights turn off.

Step 6: Use the Built-in Network Troubleshooter

  • Go to Settings > Update & Security > Windows Update.

  • Click on Troubleshoot > Additional troubleshooters.

  • Select Network adapter settings, and then click Next.

  • Follow the prompts to run a network diagnostics test.

Step 7: Use the Network Troubleshooter Tool (Optional)

  • Go to Control Panel > System and Security > Troubleshoot.

  • Click on Internet Options.

  • Select Network from the left menu.

  • Click on Properties.

  • Follow the prompts to run a network troubleshooter.

Step 8: Run Command Prompt with Elevated Privileges (If Necessary)

  • Press Win + R, type cmd and press Enter.

  • Type netsh winsock reset and press Enter to reset Windows Socket settings.

  • Type ipconfig /all and press Enter to view your network configuration.

Step 9: Reconnect Your Device

  • Connect your device to the network using the default login credentials.

  • If you’re still having issues, try restarting your device or seeking further assistance from a computer professional.

By following these steps, you should be able to resolve common Windows installation problems related to network configuration.